Small scissor lift table

Small scissor lift 1)Loading capacity:0.5-5t 2)Electric or manual pump 3)Reduce woker fatifue 4)ISO9001-2008

Features1)Loading capacity:0.1ton-28ton2)Lift mechanism adopts high-duty steel rectangular tube3)Table:  anti-slip insulating plastic blanket or anti-slip checkered steel plate4)Imported or domestic joint venture hydraulic cylinder and seal ring can ensure  good sealing performance PowerLocal power is available at the working sites(such as 220v 380v 400v) or manual pump when the electricity is not available Control1)Electrical up-down control device, or manual hydraulic pump device when the electricity Is not available.We can also install the remote control device according to your requirement2) The remote control and multi-control points at the different floors could be realized at each control point. Lift Up,Stop and Lower could be realized at each control point.The lift platform could stop at the accurate loaction point Safety1)In special circumstance, the machine will use explosion-proof electric equipment2)The work table would equipped the guardrail to guarantee safety3)The lift has hydraulic overload protective device to ensure  equipment still work normally when the load is beyond rated load capacity4)The machine is equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position.

Two types

1)The stationary hydraulic lift has two main types according to different situations.

2)One is to be sited on a special place to loading cargos and then lifting to a certain height to handle and move the cargo.The other is sited in a lift pit ang accessorial tracks .

3)The table is in the same level with the ground which is convenient to move the cargos into it.In this way it also can be called freight elevator.

Parameter

Model #	Load Capacity	Table Size	Lifting Height	No-workingHeight	Overall Dimensions	Motor Power
SJG0.8-3.5	0.8T	1.8×1.2M	3.5M	800MM	1.8×1.2×0.80M	2.2KW/380V
SJG2-3.5	2T	1.8×1.2M	3.5M	680MM	1.8×1.2×0.68M	3KW/380V
SJG2-0.5	2T	1.8×1.6M	0.5M	440MM	1.8×1.6×0.44M	2.2KW/380V
SJG1-6	1T	1.9×1.1M	6.0M	1100MM	1.9×1.1×1.10M	3KW/380V
SJG2-6	2T	2.0×1.3M	6.0M	1200MM	2.0×1.3×1.20M	4KW/380V
SJG1.5-0.8	1.5T	2.0×1.5M	0.8M	500MM	2.0×1.5×0.50M	3KW/380V
SJG1-4.3	1T	2.0×1.8M	4.3M	800MM	2.0×1.8×0.80M	4KW/380V
SJG2-6	2T	2.0×2.0M	6.0M	1030MM	2.0×2.0×1.03M	4KW/380V
SJG3-2.4	3T	2.0×2.0M	2.4M	630MM	2.0×2.0×0.63M	2.2KW/380V
SJG3-2.4	3T	2.0×2.0M	2.4M	660MM	2.0×2.0×0.66M	4KW/380V
SJG2-5	2T	2.1×1.2M	5.0M	870MM	2.1×1.2×0.87M	4KW/380V
SJG1-4.5	1T	2.1×1.5M	4.5M	800MM	2.1×1.5×0.80M	3KW/380V
SJG5-6.5	5T	2.2×1.6M	6.5M	1280MM	2.2×1.6×1.28M	5.5KW/380V
SJG3-6.5	3T	2.2×1.9M	6.5M	1520MM	2.2×1.9×1.52M	5.5KW/380V
SJG1.5-3.8	1.5T	2.2×2.0M	3.8M	700MM	2.2×2.0×0.70M	4KW/380V
SJG2-3.8	2T	2.2×2.0M	3.8M	830MM	2.2×2.0×0.83M	4KW/380V
SJG2-5	2T	2.3×1.4M	5.0M	870MM	2.3×1.4×0.87M	4KW/380V
SJG2-5.15	2T	2.3×1.4M	5.1M	870MM	2.3×1.4×0.87M	4KW/380V
SJG2-1.3	2T	2.3×2.0M	1.3M	400MM	2.3×2.0×0.40M	2.2KW/380V

We can be design according to your requirements. please  tell me your:1\ elevating height (from level ground to platform)

2\ capacity3\ platform size

Then i will send you quotation with detailed specifications and desing drawing ASAP.

   

Small scissor lift table